The humidity of the air in life is related to our health to a certain extent, and proper humidity in industrial production is even more important. Therefore, the use of industrial humidifiers in some relatively dry places is very important. We must not only be able to use them. We also need to know how to deal with industrial humidifiers when they fail. Yiling will introduce some knowledge in this area to you.
Oscillation Type Single-motor Heavy Humidifier convert electrical energy into mechanical energy through a transducer to overcome the cohesive force of water molecules, atomize water into micron-sized ultrafine particles, and then atomize the water through a pneumatic device and diffuse it into the indoor space to achieve humidification. Purpose. When the humidifier is in use, there will be no fogging. The reasons for no fogging are nothing more than two reasons:
Industrial humidifiers do not produce fog. Reason 1: The humidifier is not cleaned and maintained regularly, and a large amount of scale has formed on the atomization sheet immersed in water for a long time. Therefore, the atomizer cannot operate normally, resulting in less or no fogging. fog.
Maintenance method: clean the atomizer regularly, or replace the atomizer sheet.
Maintenance method: Use pure water, turn off and change the water once a day, and clean it thoroughly once a week. If it is a humidifier that uses ordinary tap water, it needs to be cleaned regularly. Use a special cleaning agent to clean the sink, atomizer, and water tank.
Industrial humidifier does not produce fog Reason 2: Check whether the fan is working normally when the humidifier is turned on and does not produce fog, and whether there is wind coming out. If the fan does not work, you need to check the electrical components, whether the power supply is normal, and whether the fan is damaged.
Repair method: replace the power supply or fan.
Everyone should pay attention to humidity control when using humidifiers. According to experiments, people feel the most suitable and healthy when the humidity is 40%RH-60%RH. Therefore, it is best to use a humidifier with automatic constant humidity function. Only when the indoor humidity is lower than the standard range, the machine will start humidification, and if the humidity is higher than this range, the amount of fog will be reduced to stop humidification. If you use a humidifier without automatic constant humidity function, it is best to put a hygrometer indoors to know the air humidity at any time and adjust the working condition of the humidifier according to the humidity.
Post time: Dec-22-2021